V2EX = way to explore
V2EX 是一个关于分享和探索的地方
现在注册
已注册用户请  登录
wsgzao
V2EX  ›  程序员

CPU 优化建议使用 cpupower 设置 CPU Performance 模式

  •  
  •   wsgzao ·
    wsgzao · 2019-01-18 16:31:02 +08:00 · 5969 次点击
    这是一个创建于 1896 天前的主题,其中的信息可能已经有所发展或是发生改变。

    前言

    CPU 动态节能技术用于降低服务器功耗,通过选择系统空闲状态不同的电源管理策 略,可以实现不同程度降低服务器功耗,更低的功耗策略意味着 CPU 唤醒更慢对性能 影响更大。对于对时延和性能要求高的应用,建议关闭 CPU 的动态调节功能,禁止 CPU 休眠,并把 CPU 频率固定到最高。通常建议在服务器 BIOS 中修改电源管理为 Performance,如果发现 CPU 模式为 conservative 或者 powersave,可以使用 cpupower 设置 CPU Performance 模式,效果也是相当显著的。

    CPU 优化建议使用 cpupower 设置 CPU Performance 模式

    更新历史

    2019 年 01 月 18 日 - 初稿

    阅读原文 - https://wsgzao.github.io/post/cpupower/

    扩展阅读

    CPU frequency scaling - https://wiki.archlinux.org/index.php/CPU_frequency_scaling


    cpufreq 的五种模式

    cpufreq 是一个动态调整 cpu 频率的模块,系统启动时生成一个文件夹 /sys/devices/system/cpu/cpu0/cpufreq/,里面有几个文件,其中 scaling_min_freq 代表最低频率,scaling_max_freq 代表最高频率,scalin_governor 代表 cpu 频率调整模式,用它来控制 CPU 频率。

    cd /sys/devices/system/cpu/cpu0/cpufreq/
    
    affected_cpus
    bios_limit
    cpuinfo_cur_freq
    cpuinfo_max_freq
    cpuinfo_min_freq
    cpuinfo_transition_latency
    freqdomain_cpus
    related_cpus
    scaling_available_frequencies
    scaling_available_governors
    scaling_cur_freq
    scaling_driver
    scaling_governor
    scaling_max_freq
    scaling_min_freq
    scaling_setspeed
    
    # 查看当前的调节器
    cat /sys/devices/system/cpu/cpu0/cpufreq/scaling_governor
    conservative
    
    # 查看频率信息
    cpupower frequency-info
    
    analyzing CPU 0:
      driver: acpi-cpufreq
      CPUs which run at the same hardware frequency: 0
      CPUs which need to have their frequency coordinated by software: 0
      maximum transition latency: 10.0 us
      hardware limits: 800 MHz - 2.10 GHz
      available frequency steps:  2.10 GHz, 2.10 GHz, 2.00 GHz, 1.90 GHz, 1.80 GHz, 1.70 GHz, 1.60 GHz, 1.50 GHz, 1.40 GHz, 1.30 GHz, 1.20 GHz, 1.10 GHz, 1000 MHz, 900 MHz, 800 MHz
      available cpufreq governors: conservative userspace powersave ondemand performance
      current policy: frequency should be within 800 MHz and 2.10 GHz.
                      The governor "performance" may decide which speed to use
                      within this range.
      current CPU frequency: Unable to call hardware
      current CPU frequency: 2.10 GHz (asserted by call to kernel)
      boost state support:
        Supported: yes
        Active: yes
    
    
    1. performance: 顾名思义只注重效率,将 CPU 频率固定工作在其支持的最高运行频率上,而不动态调节。
    2. Userspace:最早的 cpufreq 子系统通过 userspace governor 为用户提供了这种灵活性。系统将变频策略的决策权交给了用户态应用程序,并提供了相应的接口供用户态应用程序调节 CPU 运行频率使用。也就是长期以来都在用的那个模式。可以通过手动编辑配置文件进行配置
    3. powersave: 将 CPU 频率设置为最低的所谓“省电”模式,CPU 会固定工作在其支持的最低运行频率上。因此这两种 governors 都属于静态 governor,即在使用它们时 CPU 的运行频率不会根据系统运行时负载的变化动态作出调整。这两种 governors 对应的是两种极端的应用场景,使用 performance governor 是对系统高性能的最大追求,而使用 powersave governor 则是对系统低功耗的最大追求。
    4. ondemand: 按需快速动态调整 CPU 频率, 一有 cpu 计算量的任务,就会立即达到最大频率运行,等执行完毕就立即回到最低频率; ondemand:userspace 是内核态的检测,用户态调整,效率低。而 ondemand 正是人们长期以来希望看到的一个完全在内核态下工作并且能够以更加细粒度的时间间隔对系统负载情况进行采样分析的 governor。 在 ondemand governor 监测到系统负载超过 up_threshold 所设定的百分比时,说明用户当前需要 CPU 提供更强大的处理能力,因此 ondemand governor 会将 CPU 设置在最高频率上运行。但是当 ondemand governor 监测到系统负载下降,可以降低 CPU 的运行频率时,到底应该降低到哪个频率呢? ondemand governor 的最初实现是在可选的频率范围内调低至下一个可用频率,例如 CPU 支持三个可选频率,分别为 1.67GHz、1.33GHz 和 1GHz,如果 CPU 运行在 1.67GHz 时 ondemand governor 发现可以降低运行频率,那么 1.33GHz 将被选作降频的目标频率。
    5. conservative: 与 ondemand 不同,平滑地调整 CPU 频率,频率的升降是渐变式的,会自动在频率上下限调整,和 ondemand 的区别在于它会按需分配频率,而不是一味追求最高频率;

    cpupower 设置 performance

    从 conservative 或者 powersave 切换到 performance 的效果还是杠杠的

    # CentOS 安装 kernel-tools
    yum install kernel-tools
    
    # Ubuntu 安装 CPU 模式无图形化切换器
    apt install cpufrequtils
    
    # cpupower 设置 performance
    cpupower frequency-set -g performance
    
    # 查看当前的调节器
    cat /sys/devices/system/cpu/cpu0/cpufreq/scaling_governor
    performance
    
    

    目前尚无回复
    关于   ·   帮助文档   ·   博客   ·   API   ·   FAQ   ·   我们的愿景   ·   实用小工具   ·   5285 人在线   最高记录 6543   ·     Select Language
    创意工作者们的社区
    World is powered by solitude
    VERSION: 3.9.8.5 · 34ms · UTC 09:19 · PVG 17:19 · LAX 02:19 · JFK 05:19
    Developed with CodeLauncher
    ♥ Do have faith in what you're doing.