这是一个创建于 3270 天前的主题，其中的信息可能已经有所发展或是发生改变。
运营商：上海电信百兆下行（请不要吐槽可怜的上行），非精品网
Speedtest
U2B 视频
ISP 测速
测试手段为前端 h2/TLS+后端 Squid 。
但又一个奇怪的问题，用 SS 测速度却偏慢，难道是新协议的优越性？？
开启 SS ：
这次测试并没有出现前段时间大家反映的因国人涌入而被玩坏的情况，带宽跑满，结果非常满意。
后记：出现两个问题供大家参考
1. 无法 ping 通主机 IP （刚部署时是可以的）， SSH 电信这边无法登陆，从 DO 的 VPS 直接 SSH 却通的，墙的可疑性很大。
2. V*P*N 手段全线失败，虽然连接上，但显示访问受限， tracert 到一暗黑节点就丢失了，怀疑 vultr 封锁。
Speedtest
U2B 视频
ISP 测速
测试手段为前端 h2/TLS+后端 Squid 。
但又一个奇怪的问题，用 SS 测速度却偏慢，难道是新协议的优越性？？
开启 SS ：
这次测试并没有出现前段时间大家反映的因国人涌入而被玩坏的情况，带宽跑满，结果非常满意。
后记：出现两个问题供大家参考
1. 无法 ping 通主机 IP （刚部署时是可以的）， SSH 电信这边无法登陆，从 DO 的 VPS 直接 SSH 却通的，墙的可疑性很大。
2. V*P*N 手段全线失败，虽然连接上，但显示访问受限， tracert 到一暗黑节点就丢失了，怀疑 vultr 封锁。
 |
1
taresky 2015-12-18 18:13:48 +08:00  1
喷子不会信的，它们会说你在给电信洗地。
|
 |
2
yexm0 2015-12-18 18:17:32 +08:00
这个时候只需要把祸甩给 ntt 就行了
 |
 |
3
d7101120120 2015-12-18 18:35:20 +08:00
NTT 线路确实时有问题，很多时候我从香港的 vps 去 ping 东京的 vultr 都延迟 100+，速度也奇慢，要知道以前我的移动直接 ping 也就 90 左右。
|
 |
4
Slienc7 2015-12-18 18:59:34 +08:00
从上个月流量加倍之后有绕路问题，部分地区电信绕路美国，实测延迟 300ms+ ，近期不知。
|
 |
5
gamexg 2015-12-18 19:07:55 +08:00 via Android
写了个 tls+http 代理，结果几分钟 443 端口就被封...
|
 |
6
lelsetsuna 2015-12-18 19:25:13 +08:00
最近江苏电信到 conoha 的速度快了好多，晚高峰居然能看 720p 了。。。
|
 |
7
datocp 2015-12-18 19:39:22 +08:00
嘿嘿，我可以说别高兴太早，苦日子还在后头吗。。。这个服务器我还一个月都没试用完了。今天先是体验到 1000mbps 的情况，然后今天好像倒霉的就是测试了一下 softether vpn client ，结果现在成这样了，这是这段时间的最恐怖体验，已经基本不可用状态。。。。。。。。。。。。。
哎，真的别高兴太早，我以前推荐的时候，别的朋友就说很慢，现在轮到我说慢了，垃圾电信。 2015.12.18 19:35:44 LOG3[291]: s_connect: s_poll_wait xxx.xxx.xxx.xxx:80: TIMEOUTconnect exceeded 2015.12.18 19:35:44 LOG5[291]: Connection reset: 0 byte(s) sent to SSL, 0 byte(s) sent to socket 2015.12.18 19:35:44 LOG3[295]: s_connect: s_poll_wait xxx.xxx.xxx.xxx:80: TIMEOUTconnect exceeded 2015.12.18 19:35:44 LOG5[295]: Connection reset: 0 byte(s) sent to SSL, 0 byte(s) sent to socket 2015.12.18 19:35:44 LOG3[297]: s_connect: s_poll_wait xxx.xxx.xxx.xxx:80: TIMEOUTconnect exceeded 2015.12.18 19:35:44 LOG5[297]: Connection reset: 0 byte(s) sent to SSL, 0 byte(s) sent to socket 2015.12.18 19:35:44 LOG3[299]: s_connect: s_poll_wait xxx.xxx.xxx.xxx:80: TIMEOUTconnect exceeded 2015.12.18 19:35:44 LOG3[293]: s_connect: s_poll_wait xxx.xxx.xxx.xxx:80: TIMEOUTconnect exceeded 2015.12.18 19:35:44 LOG5[299]: Connection reset: 0 byte(s) sent to SSL, 0 byte(s) sent to socket 2015.12.18 19:35:44 LOG5[293]: Connection reset: 0 byte(s) sent to SSL, 0 byte(s) sent to socket 2015.12.18 19:35:44 LOG3[290]: s_connect: s_poll_wait xxx.xxx.xxx.xxx:80: TIMEOUTconnect exceeded 2015.12.18 19:35:44 LOG5[290]: Connection reset: 0 byte(s) sent to SSL, 0 byte(s) sent to socket 2015.12.18 19:35:44 LOG3[292]: s_connect: s_poll_wait xxx.xxx.xxx.xxx:80: TIMEOUTconnect exceeded 2015.12.18 19:35:44 LOG5[292]: Connection reset: 0 byte(s) sent to SSL, 0 byte(s) sent to socket 2015.12.18 19:35:44 LOG3[296]: s_connect: s_poll_wait xxx.xxx.xxx.xxx:80: TIMEOUTconnect exceeded 2015.12.18 19:35:44 LOG5[296]: Connection reset: 0 byte(s) sent to SSL, 0 byte(s) sent to socket 2015.12.18 19:35:44 LOG3[298]: s_connect: s_poll_wait xxx.xxx.xxx.xxx:80: TIMEOUTconnect exceeded 2015.12.18 19:35:44 LOG5[298]: Connection reset: 0 byte(s) sent to SSL, 0 byte(s) sent to socket 2015.12.18 19:35:44 LOG3[300]: s_connect: s_poll_wait xxx.xxx.xxx.xxx:80: TIMEOUTconnect exceeded 2015.12.18 19:35:44 LOG5[300]: Connection reset: 0 byte(s) sent to SSL, 0 byte(s) sent to socket 2015.12.18 19:35:44 LOG3[294]: s_connect: s_poll_wait xxx.xxx.xxx.xxx:80: TIMEOUTconnect exceeded 2015.12.18 19:35:44 LOG5[294]: Connection reset: 0 byte(s) sent to SSL, 0 byte(s) sent to socket 2015.12.18 19:35:44 LOG5[301]: Service [server6] accepted connection from 127.0.0.1:9127 2015.12.18 19:35:44 LOG6[301]: s_connect: connecting xxx.xxx.xxx.xxx:80 2015.12.18 19:35:48 LOG6[288]: Read socket closed (readsocket) 2015.12.18 19:35:48 LOG6[288]: SSL_shutdown successfully sent close_notify alert 2015.12.18 19:35:48 LOG5[288]: Connection closed: 529 byte(s) sent to SSL, 185807 byte(s) sent to socket 2015.12.18 19:35:54 LOG3[301]: s_connect: s_poll_wait xxx.xxx.xxx.xxx:80: TIMEOUTconnect exceeded 2015.12.18 19:35:54 LOG5[301]: Connection reset: 0 byte(s) sent to SSL, 0 byte(s) sent to socket 2015.12.18 19:35:54 LOG5[302]: Service [server6] accepted connection from 127.0.0.1:9129 2015.12.18 19:35:54 LOG6[302]: s_connect: connecting xxx.xxx.xxx.xxx:80 2015.12.18 19:36:04 LOG3[302]: s_connect: s_poll_wait xxx.xxx.xxx.xxx:80: TIMEOUTconnect exceeded 2015.12.18 19:36:04 LOG5[302]: Connection reset: 0 byte(s) sent to SSL, 0 byte(s) sent to socket 2015.12.18 19:36:04 LOG5[303]: Service [server6] accepted connection from 127.0.0.1:9131 |
|
8
datocp 2015-12-18 19:40:41 +08:00
服务器端。。。。
2015.12.18 10:59:49 LOG3[20]: SSL_accept: Peer suddenly disconnected 2015.12.18 11:01:04 LOG3[21]: transfer: s_poll_wait: TIMEOUTclose exceeded: closing 2015.12.18 11:01:09 LOG3[12]: transfer: s_poll_wait: TIMEOUTclose exceeded: closing 2015.12.18 11:01:11 LOG3[15]: transfer: s_poll_wait: TIMEOUTclose exceeded: closing 2015.12.18 11:01:11 LOG3[17]: transfer: s_poll_wait: TIMEOUTclose exceeded: closing 2015.12.18 11:01:11 LOG3[18]: transfer: s_poll_wait: TIMEOUTclose exceeded: closing 2015.12.18 11:01:11 LOG3[14]: transfer: s_poll_wait: TIMEOUTclose exceeded: closing 2015.12.18 11:01:50 LOG3[23]: SSL_accept: Peer suddenly disconnected 2015.12.18 11:01:50 LOG3[24]: SSL_accept: Peer suddenly disconnected 2015.12.18 11:06:16 LOG3[32]: transfer: s_poll_wait: TIMEOUTclose exceeded: closing 2015.12.18 11:06:16 LOG3[34]: transfer: s_poll_wait: TIMEOUTclose exceeded: closing 2015.12.18 11:06:17 LOG3[33]: transfer: s_poll_wait: TIMEOUTclose exceeded: closing 2015.12.18 11:06:17 LOG3[36]: transfer: s_poll_wait: TIMEOUTclose exceeded: closing 2015.12.18 11:06:17 LOG3[28]: transfer: s_poll_wait: TIMEOUTclose exceeded: closing 2015.12.18 11:06:17 LOG3[31]: transfer: s_poll_wait: TIMEOUTclose exceeded: closing 2015.12.18 11:06:34 LOG3[56]: SSL_accept: Peer suddenly disconnected 2015.12.18 11:07:58 LOG3[50]: transfer: s_poll_wait: TIMEOUTclose exceeded: closing 2015.12.18 11:07:58 LOG3[52]: transfer: s_poll_wait: TIMEOUTclose exceeded: closing 2015.12.18 11:07:59 LOG3[53]: transfer: s_poll_wait: TIMEOUTclose exceeded: closing 2015.12.18 11:10:22 LOG3[60]: transfer: s_poll_wait: TIMEOUTclose exceeded: closing 2015.12.18 11:10:22 LOG3[65]: transfer: s_poll_wait: TIMEOUTclose exceeded: closing 2015.12.18 11:10:39 LOG3[61]: transfer: s_poll_wait: TIMEOUTclose exceeded: closing 2015.12.18 11:10:54 LOG3[66]: transfer: s_poll_wait: TIMEOUTclose exceeded: closing 2015.12.18 11:10:55 LOG3[76]: transfer: s_poll_wait: TIMEOUTclose exceeded: closing 2015.12.18 11:10:56 LOG3[78]: transfer: s_poll_wait: TIMEOUTclose exceeded: closing 2015.12.18 11:11:55 LOG3[74]: transfer: s_poll_wait: TIMEOUTclose exceeded: closing 2015.12.18 11:19:30 LOG4[ui]: Insecure file permissions on /da/ca/stunnel.pem 2015.12.18 11:21:08 LOG4[ui]: Insecure file permissions on /da/ca/stunnel.pem 2015.12.18 11:24:25 LOG3[0]: transfer: s_poll_wait: TIMEOUTclose exceeded: closing 2015.12.18 11:24:31 LOG3[29]: Unexpected socket close (s_ssl_read) 2015.12.18 11:24:57 LOG3[5]: transfer: s_poll_wait: TIMEOUTclose exceeded: closing 2015.12.18 11:24:57 LOG3[9]: transfer: s_poll_wait: TIMEOUTclose exceeded: closing 2015.12.18 11:24:57 LOG3[6]: transfer: s_poll_wait: TIMEOUTclose exceeded: closing 2015.12.18 11:24:57 LOG3[8]: transfer: s_poll_wait: TIMEOUTclose exceeded: closing 2015.12.18 11:24:58 LOG3[4]: transfer: s_poll_wait: TIMEOUTclose exceeded: closing 2015.12.18 11:24:59 LOG3[3]: transfer: s_poll_wait: TIMEOUTclose exceeded: closing 2015.12.18 11:25:01 LOG3[7]: transfer: s_poll_wait: TIMEOUTclose exceeded: closing 2015.12.18 11:25:27 LOG3[11]: transfer: s_poll_wait: TIMEOUTclose exceeded: closing 2015.12.18 11:25:28 LOG3[12]: transfer: s_poll_wait: TIMEOUTclose exceeded: closing 2015.12.18 11:26:27 LOG3[18]: transfer: s_poll_wait: TIMEOUTclose exceeded: closing 2015.12.18 11:26:27 LOG3[19]: transfer: s_poll_wait: TIMEOUTclose exceeded: closing 2015.12.18 11:26:29 LOG3[28]: transfer: s_poll_wait: TIMEOUTclose exceeded: closing 2015.12.18 11:26:33 LOG3[15]: transfer: s_poll_wait: TIMEOUTclose exceeded: closing 2015.12.18 11:26:34 LOG3[30]: transfer: s_poll_wait: TIMEOUTclose exceeded: closing 2015.12.18 11:27:39 LOG3[31]: transfer: s_poll_wait: TIMEOUTclose exceeded: closing 2015.12.18 11:28:07 LOG3[43]: transfer: s_poll_wait: TIMEOUTclose exceeded: closing 2015.12.18 11:28:07 LOG3[38]: transfer: s_poll_wait: TIMEOUTclose exceeded: closing 2015.12.18 11:28:07 LOG3[42]: transfer: s_poll_wait: TIMEOUTclose exceeded: closing 2015.12.18 11:28:26 LOG3[44]: transfer: s_poll_wait: TIMEOUTclose exceeded: closing 2015.12.18 11:28:46 LOG3[46]: transfer: s_poll_wait: TIMEOUTclose exceeded: closing 2015.12.18 11:28:46 LOG3[48]: transfer: s_poll_wait: TIMEOUTclose exceeded: closing 2015.12.18 11:28:46 LOG3[50]: transfer: s_poll_wait: TIMEOUTclose exceeded: closing 2015.12.18 11:28:46 LOG3[49]: transfer: s_poll_wait: TIMEOUTclose exceeded: closing 2015.12.18 11:28:55 LOG3[51]: transfer: s_poll_wait: TIMEOUTclose exceeded: closing 2015.12.18 11:29:15 LOG3[55]: transfer: s_poll_wait: TIMEOUTclose exceeded: closing 2015.12.18 11:29:30 LOG3[60]: transfer: s_poll_wait: TIMEOUTclose exceeded: closing 2015.12.18 11:29:30 LOG3[59]: transfer: s_poll_wait: TIMEOUTclose exceeded: closing 2015.12.18 11:33:32 LOG3[63]: transfer: s_poll_wait: TIMEOUTclose exceeded: closing 2015.12.18 11:34:56 LOG3[64]: transfer: s_poll_wait: TIMEOUTclose exceeded: closing 2015.12.18 11:34:56 LOG3[67]: transfer: s_poll_wait: TIMEOUTclose exceeded: closing 2015.12.18 11:34:56 LOG3[70]: transfer: s_poll_wait: TIMEOUTclose exceeded: closing 2015.12.18 11:34:56 LOG3[71]: transfer: s_poll_wait: TIMEOUTclose exceeded: closing 2015.12.18 11:34:57 LOG3[66]: transfer: s_poll_wait: TIMEOUTclose exceeded: closing 2015.12.18 11:35:01 LOG3[68]: transfer: s_poll_wait: TIMEOUTclose exceeded: closing 2015.12.18 11:35:02 LOG3[72]: transfer: s_poll_wait: TIMEOUTclose exceeded: closing 2015.12.18 11:35:07 LOG3[69]: transfer: s_poll_wait: TIMEOUTclose exceeded: closing 2015.12.18 11:35:38 LOG3[86]: transfer: s_poll_wait: TIMEOUTclose exceeded: closing 2015.12.18 11:35:42 LOG3[91]: transfer: s_poll_wait: TIMEOUTclose exceeded: closing 2015.12.18 11:35:43 LOG3[74]: transfer: s_poll_wait: TIMEOUTclose exceeded: closing 2015.12.18 11:36:17 LOG3[81]: transfer: s_poll_wait: TIMEOUTclose exceeded: closing 2015.12.18 11:36:26 LOG3[79]: transfer: s_poll_wait: TIMEOUTclose exceeded: closing 2015.12.18 11:36:26 LOG3[92]: transfer: s_poll_wait: TIMEOUTclose exceeded: closing 2015.12.18 11:36:26 LOG3[77]: transfer: s_poll_wait: TIMEOUTclose exceeded: closing 2015.12.18 11:36:41 LOG3[96]: transfer: s_poll_wait: TIMEOUTclose exceeded: closing 2015.12.18 11:37:01 LOG3[102]: s_connect: s_poll_wait 23.251.96.136:80: TIMEOUTconnect exceeded 2015.12.18 11:37:02 LOG3[103]: s_connect: s_poll_wait 23.251.96.136:80: TIMEOUTconnect exceeded 2015.12.18 11:37:03 LOG3[104]: s_connect: s_poll_wait 23.251.96.136:80: TIMEOUTconnect exceeded 2015.12.18 11:38:24 LOG3[114]: Unexpected socket close (s_ssl_read) 2015.12.18 11:38:54 LOG3[106]: transfer: s_poll_wait: TIMEOUTclose exceeded: closing 2015.12.18 11:38:55 LOG3[108]: transfer: s_poll_wait: TIMEOUTclose exceeded: closing 2015.12.18 11:38:55 LOG3[107]: transfer: s_poll_wait: TIMEOUTclose exceeded: closing 2015.12.18 11:38:57 LOG3[109]: transfer: s_poll_wait: TIMEOUTclose exceeded: closing 2015.12.18 11:39:01 LOG3[105]: transfer: s_poll_wait: TIMEOUTclose exceeded: closing 2015.12.18 11:39:01 LOG3[102]: transfer: s_poll_wait: TIMEOUTclose exceeded: closing 2015.12.18 11:39:02 LOG3[103]: transfer: s_poll_wait: TIMEOUTclose exceeded: closing 2015.12.18 11:39:42 LOG3[101]: transfer: s_poll_wait: TIMEOUTclose exceeded: closing |
|
9
datocp 2015-12-18 19:45:55 +08:00
哎，中国的网络管制真是无法无天，从中间两边断开。太他妈无法无天了，还天天依法制国，制你妹。
|
 |
10
wm5d8b 2015-12-18 20:07:43 +08:00 via Android
h2 指的是 HTTP/2 ？
|
 |
11
Halry 2015-12-18 20:09:31 +08:00 via Android
反正我是怕了，换了 hk 的 softlayer
|
 |
13
Andy1999 2015-12-18 20:26:46 +08:00
  拿腾讯云服务器挂了 SS 跑的 本地跑不上 100W 有点坑 |
 |
14
ryd994 2015-12-18 20:29:47 +08:00
你是 nginx 直接 proxy_pass 给 squid 的么？ https 的网页是怎么处理的呢？就是 CONNECT 请求
|
 |
15
miyuki 2015-12-18 20:34:03 +08:00
po 主可以分享下 http/2 代理配置教程吗
|
|
17
yexm0 2015-12-18 20:45:58 +08:00
|
|
18
datocp 2015-12-18 21:16:19 +08:00
晚上 21 ： 14 分的。。。为什么什么样的 vps 都没什么惊喜，也许还没入电信黑名单吧。。。这还是锐速加速过后的。。。
 |
 |
19
aec4d 2015-12-18 21:17:24 +08:00 1
|
|
20
datocp 2015-12-18 21:32:34 +08:00
 |
 |
21
Quaintjade 2015-12-18 22:44:37 +08:00
上海电信 50M/10M 家庭宽带，测速对象： Vultr 东京官方测速文件
测试结果：最高也就 1Mbps 多些 http://image17.poco.cn/mypoco/myphoto/20151218/22/5657397520151218223733078.png 网卡显示 Hyper-V 虚拟网卡是因为装了 Hyper-V 改了桥接，测速的是母系统，不影响速度。 http://image17.poco.cn/mypoco/myphoto/20151218/22/5657397520151218224206033.png |
|
22
Quaintjade 2015-12-18 22:45:37 +08:00
@taresky 唯独你没资格说，呵呵，上次打脸还不够？
|
 |
23
blessme 2015-12-19 01:46:00 +08:00
Vultr JP ， 广东电信是先绕道美国然后再去日本，所以还不如洛杉矶的好。
|
 |
24
cevincheung 2015-12-19 02:03:53 +08:00
@Andy1999 腾讯可以看油管？
|
|
25
Andy1999 2015-12-19 02:06:46 +08:00 via iPhone
@cevincheung 句子读清楚
|
|
26
cevincheung 2015-12-19 05:38:03 +08:00
@Andy1999 好吧，以为是 qcloud 做 ss-server
|
 |
28
kj54321 OP 1
@ryd994 我用的是 nghttp2, nginx 至今无法做 https 正向代理, 详情参考菊苣博文： https://wzyboy.im/post/1052.html
|
 |
29
airycanon 2015-12-19 10:30:00 +08:00
@lelsetsuna conoha 解析 fonts.googleapis.com 没问题么？
|
|
31
kj54321 OP 1
@airycanon 萌妹解析 googleapi/fonts/ads/analysis 的确有问题,要自己指定 dns
|
 |
33
21grams 2015-12-19 12:56:15 +08:00
然并卵，你能稳定用上三个月再说。
|
|
34
datocp 2015-12-19 13:37:13 +08:00
conoha z.com 的 dns 都是比较怪的，说不出来的问题在哪，比如使用 google 显示的是上海 广州，也不知道用了什么黑科技，最终发现使用 8.8.x.x 也是有问题的，干脆就使用美国的 dns 服务器。自己 apt-get install dnsmasq ，然后 vi /etc/dnsmasq.conf,service dnsmasq restart 就差不多了。检验 nslookup fonts.googleapis.com ，如果不成功可以尝试 vi /etc/resolv.conf 写入 nameserver 127.0.0.1 ，给 chattr +i /etc/resolv.conf,取消只读 chattr -i /etc/resolv.conf
dnsmasq.conf #no-resolv server=4.2.2.1 server=4.2.2.2 #server=8.8.4.4 #server=8.8.8.8 #address=/fonts.googleapis.com/74.125.196.95 server=/fonts.googleapis.com/4.2.2.1 |
 |
35
momou 2015-12-19 13:45:30 +08:00
电信干扰得厉害，才 40K 左右，换联通 4G 上可上到 5M
|
 |
36
TaMud 2015-12-19 15:00:46 +08:00
日本线路到电信不快，没有多少 k
问题出在 vps 到中国不快，在 vps 上下载任何其它资源是飞奔 |
 |
37
smileawei 2015-12-19 15:17:14 +08:00
现在广东电信到 Vultr 是绕道北美。但是丢包明显改善了。之前丢包丢成狗
|
 |
39
ershiwo 2015-12-19 17:00:52 +08:00
前段时间机房丢包严重，最近这两天有点改善。
|
Select Language